Search
Filters
Close

Vulcan DayBright LED System (2 Red, 2 Green) w/ Controller

Controller with four LED modules providing super bright red and green lights
SKU: 70029
Manufacturer: Vulcan UAV
£183.33 excl VAT
£220.00 incl VAT
 

The Vulcan DayBright LED system uses LED modules that fit between the motor mounts on Vulcan airframes

 This is the new Version 2 LED set which includes four modules with each module incorporating two super bright LEDs visible in daylight at up to 2000 feet

 There are two modules with green, and two with red LEDs for universal port (red - left) and starboard (green - right) orientation identification. Modules are supplied with an 800mm lead

 Modules now come with a plug at the LED end allowing the removal of the module if required without removing it's wires from the arm. The new V2 modules also have a conformal coating allowing them to be fully rain resistant, and a stronger lens

 The controller unit has four individually controlled outputs, each capable of driving more that one LED module if required. Using the controller you can set 28 different flash patterns for your LEDs, and control them from your radio transmitter with a switch channel. The controller can be powered directly from up to 10s Lipo batteries (up to 42v). An RC voltage input with the control signal is also required from the radio Rx

Specification:

LED module weight (inc. wire): 15g each
Controller weight: 36g 
Control voltage input (from RC): 4v - 13v 
Controller voltage input (main power for lights): 6v - 42v 
LED output: 5v 4A max

 

The Vulcan DayBright LED system uses LED modules that fit between the motor mounts on Vulcan airframes

 This is the new Version 2 LED set which includes four modules with each module incorporating two super bright LEDs visible in daylight at up to 2000 feet

 There are two modules with green, and two with red LEDs for universal port (red - left) and starboard (green - right) orientation identification. Modules are supplied with an 800mm lead

 Modules now come with a plug at the LED end allowing the removal of the module if required without removing it's wires from the arm. The new V2 modules also have a conformal coating allowing them to be fully rain resistant, and a stronger lens

 The controller unit has four individually controlled outputs, each capable of driving more that one LED module if required. Using the controller you can set 28 different flash patterns for your LEDs, and control them from your radio transmitter with a switch channel. The controller can be powered directly from up to 10s Lipo batteries (up to 42v). An RC voltage input with the control signal is also required from the radio Rx

Specification:

LED module weight (inc. wire): 15g each
Controller weight: 36g 
Control voltage input (from RC): 4v - 13v 
Controller voltage input (main power for lights): 6v - 42v 
LED output: 5v 4A max

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent