Search
Filters
Close

KDE XF 95A HVC OPTO Brushless Multirotor ESC

KDE XF 95A HVC OPTO Brushless MultiRotor ESC
SKU: 12304
Manufacturer: KDE
£137.50 excl VAT
£165.00 incl VAT

The new UAS HVC series brings to life the next generation of technology for UAS and multirotor operation, including an Aluminum 6061-T6 case for cool running temperatures and rugged construction, allowing the ESCs to be used in a wide range of harsh environments and commercial/industrial applications.  The new series also comes pre-loaded with the latest production firmware, including these new, market leading technologies:

  • Regenerative Braking – active braking during motor deceleration phase, providing instantaneous response to the flight controller commands and matched response to acceleration profiles (less “float” during flight)
  • Temperature Controlled Synchronous Rectification – new proprietary algorithm for smooth running motors at low throttle and improved, faster response under high peak loads; all while significantly increasing flight time efficiency and reducing operating temperatures (also termed "active freewheeling")
  • Dynamic Timing and Startup Power – optimally tuned for smooth and precision controlled startup throughout the full range of UAS Brushless Motors (no hesitation, stuttering, or response lag)
  • Increased Drive and Throttle Frequency Resolution – high accuracy, linear throttle response throughout full range of operation control
  • Motor Synchronization – factory calibrated ESCs for consistent throttle control and frequency matched startup protocols

The UAS HVC series is compatible with 3S - 12S LiPo (55V Max) power systems, allowing for the next level of performance and efficiency for your UAS and multirotor applications.  In addition, the UAS HVC series includes active anti-spark circuitry, protecting the integrity and lifespan of the critical connectors upon each initial plug-in and system power-up

The series is tuned and optimized for the KDE Direct UAS multirotor Brushless Motor Series, for simple plug-and-play operation. No additional throttle calibration is required for most applications and settings are factory programmed

ESCs include 200°C, 12 AWG silicone wire power leads and 13 AWG silicone wire motor leads with dual ф6.5mm and ф4.0mm 24K matching Bullet Connectors

Includes:

  • Two (2) KDE Direct XF ф4.0mm 24K Bullet Connectors (Pair, KDEXF-BC40)
  • Two (2) KDE Direct XF ф6.5mm 24K Bullet Connectors (Pair, KDEXF-BC65)

Full Specifications:

Refresh Rate 600 Hz (50 - 600Hz Adaptive)
Maximum Peak Current 165 A (5 s)
Maximum Peak Power 7,330 W (5 s)
Maximum Continuous Current* 95+ A (180 s)
Maximum Continuous Power* 4,220+ W (180 s)
Maximum Efficiency > 98%
Voltage Range 11.1 V (3S) - 50.4 V (12S)
Internal BEC None (Opto-Isolation)
Maximum RPM 360,000 rpm (2-Pole)
PWM Rate Adaptive Dynamic Algorithm
Advance Timing 22° - 30° Dynamic Algorithm
ESC Size 37 mm (W) x 82 mm (L)
ESC Weight 84 g (110 g with Wires/Bullets)
Power Leads 12 AWG, 200°C
Motor Leads 13 AWG, 200°C
ESC Control Lead 22 AWG, 3-Wire JR (W-R-B)
ESC Programming Lead 22 AWG, 3-Wire JR (O-R-B)
Power Connects ф4.0 / ф6.5 mm Matched Pair
Motor Connects ф4.0 mm Female

* ESC requires consistent airflow (5 mph or greater)across the heatsink to maintain maximum continuous current and power ratings during operation, specified at full load condition (100% throttle). Increasing airflow or adding additional cooling can further increase the capabilities of the controller and extend the lifespan of the critical internal components

The new UAS HVC series brings to life the next generation of technology for UAS and multirotor operation, including an Aluminum 6061-T6 case for cool running temperatures and rugged construction, allowing the ESCs to be used in a wide range of harsh environments and commercial/industrial applications.  The new series also comes pre-loaded with the latest production firmware, including these new, market leading technologies:

  • Regenerative Braking – active braking during motor deceleration phase, providing instantaneous response to the flight controller commands and matched response to acceleration profiles (less “float” during flight)
  • Temperature Controlled Synchronous Rectification – new proprietary algorithm for smooth running motors at low throttle and improved, faster response under high peak loads; all while significantly increasing flight time efficiency and reducing operating temperatures (also termed "active freewheeling")
  • Dynamic Timing and Startup Power – optimally tuned for smooth and precision controlled startup throughout the full range of UAS Brushless Motors (no hesitation, stuttering, or response lag)
  • Increased Drive and Throttle Frequency Resolution – high accuracy, linear throttle response throughout full range of operation control
  • Motor Synchronization – factory calibrated ESCs for consistent throttle control and frequency matched startup protocols

The UAS HVC series is compatible with 3S - 12S LiPo (55V Max) power systems, allowing for the next level of performance and efficiency for your UAS and multirotor applications.  In addition, the UAS HVC series includes active anti-spark circuitry, protecting the integrity and lifespan of the critical connectors upon each initial plug-in and system power-up

The series is tuned and optimized for the KDE Direct UAS multirotor Brushless Motor Series, for simple plug-and-play operation. No additional throttle calibration is required for most applications and settings are factory programmed

ESCs include 200°C, 12 AWG silicone wire power leads and 13 AWG silicone wire motor leads with dual ф6.5mm and ф4.0mm 24K matching Bullet Connectors

Includes:

  • Two (2) KDE Direct XF ф4.0mm 24K Bullet Connectors (Pair, KDEXF-BC40)
  • Two (2) KDE Direct XF ф6.5mm 24K Bullet Connectors (Pair, KDEXF-BC65)

Full Specifications:

Refresh Rate 600 Hz (50 - 600Hz Adaptive)
Maximum Peak Current 165 A (5 s)
Maximum Peak Power 7,330 W (5 s)
Maximum Continuous Current* 95+ A (180 s)
Maximum Continuous Power* 4,220+ W (180 s)
Maximum Efficiency > 98%
Voltage Range 11.1 V (3S) - 50.4 V (12S)
Internal BEC None (Opto-Isolation)
Maximum RPM 360,000 rpm (2-Pole)
PWM Rate Adaptive Dynamic Algorithm
Advance Timing 22° - 30° Dynamic Algorithm
ESC Size 37 mm (W) x 82 mm (L)
ESC Weight 84 g (110 g with Wires/Bullets)
Power Leads 12 AWG, 200°C
Motor Leads 13 AWG, 200°C
ESC Control Lead 22 AWG, 3-Wire JR (W-R-B)
ESC Programming Lead 22 AWG, 3-Wire JR (O-R-B)
Power Connects ф4.0 / ф6.5 mm Matched Pair
Motor Connects ф4.0 mm Female

* ESC requires consistent airflow (5 mph or greater)across the heatsink to maintain maximum continuous current and power ratings during operation, specified at full load condition (100% throttle). Increasing airflow or adding additional cooling can further increase the capabilities of the controller and extend the lifespan of the critical internal components

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent