Search
Filters
Close

JETI 70A Opto Esc

JETI 70A Opto Esc
SKU: 12162
Manufacturer: Jeti
£50.00 excl VAT
£60.00 incl VAT


The reputation of Jeti ESCs is well known, and with this HiCopter range they bring their expertise firmly into the multicopter market

Speed controllers of the HiCopter product line are aimed at controlling and regulating BLDC motors that are used in multicopters. These controllers are pre-set by the manufacturer to work perfectly with stabilisation systems used in multicopters. The controllers accept a control signal with a frequency up to 500Hz

These are OPTO speed controllers and do not contain a BEC (Battery Elimination Circuit), but have the control signal galvanically (optically) separated from te flight battery, so there is no need to remove any wires from the signal cable when connecting to your flight controller like some ESCs

There is no option to change any settings in these ESCs, as all pre set and optimised for multicopter use

Change in the direction of rotation of the motor can be done by exchanging of any two motor wires

Specifications:

  • Wieght: 45g
  • Dimensions: 70 x 26 x 11mm
  • Sustainded current: 70A
  • Operational Temp: -20 - 85c
  • Supply Voltage: 5 - 25.2v
  • Li-Po: 2s - 6s
     


The reputation of Jeti ESCs is well known, and with this HiCopter range they bring their expertise firmly into the multicopter market

Speed controllers of the HiCopter product line are aimed at controlling and regulating BLDC motors that are used in multicopters. These controllers are pre-set by the manufacturer to work perfectly with stabilisation systems used in multicopters. The controllers accept a control signal with a frequency up to 500Hz

These are OPTO speed controllers and do not contain a BEC (Battery Elimination Circuit), but have the control signal galvanically (optically) separated from te flight battery, so there is no need to remove any wires from the signal cable when connecting to your flight controller like some ESCs

There is no option to change any settings in these ESCs, as all pre set and optimised for multicopter use

Change in the direction of rotation of the motor can be done by exchanging of any two motor wires

Specifications:

  • Wieght: 45g
  • Dimensions: 70 x 26 x 11mm
  • Sustainded current: 70A
  • Operational Temp: -20 - 85c
  • Supply Voltage: 5 - 25.2v
  • Li-Po: 2s - 6s
     
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent