FyeTech Y6 Scorpion Flyer - Frame Kit

The FyeTech Y6 Scorpion frame kit comes with everything you get in the Complete Kit except motors, ESCs Power Board and props!

The Y6 is easy to build and offers a great way into the world of multirotor UAV flying, aerial photography, FPV and more....and at a very affordable price!
Perfect for beginners and experienced pilots alike, the X4 is a well proven, strong and versatile airframe, and includes super bright LEDs premounted in each arm, and a battery monitor and voltage warning sytsem built into the lower frame plate. Just plug in the balance lead from your LiPo and the LEDs on the base plate will flash voltage warning patterns to ensure you don't run out of power and damage your battery.

The Y frame configuration gives a much better camera view for FPY or Aerial Photography and the 6 motor (two per arm) configuration also offers much greater levels of safety - unlike a quad frame, the Y6 would be much more likely to survive a motor failure and land safely. The extra 2 motors also allow an increase in the payload capacity of the Y6 over the X4.

Product includes:

3 x Center Fuselage Plates, one with pre installed battery monitoring and LED control system.
6 x Frame Arm plates with built in LEDs
3 x Landing Legs
6 x Motor Mount Base Plate
Complete set aluminum connecting pillars
Complete set screws and nuts.
Battery strap and cable ties
DEANs connector to 6 way JST splitter to power your ESCs..

You will need Threadlock to build this kit - please see our 'Hardware' section

Specification:
Dimensions (rotor tip to tip)   : 69.6cm
Max Takeoff Weight              : 1430g