| |
DJI Wookong Multi-Rotor stabilization controller is a complete flight system for all multi-rotor platforms for commercial and industrial AP applications. It offers industry leading stabilisation, truely excellent GPS functions, altitude control and external camera stabilistion, with reliable, tried and tested hardware and firmware.
The WKM is capable of flying all multirotor configurations including Y6, Quad, X8, Hexa and Octo multirotor airframes. It also has a custom mixer allowing the user to set up their own mixes for non standard machines.
The standard flight controller includes GPS position and altitude hold, as well as Return to Home and Land, and failsafe functions in case of signal loss. A super bright LED system allows the pilot to monitor the status of the controller, flight modes, GPS and power systems during flight.
A simple firmware upgrade allows fullly autonomous operation with a laptop based GCS, waypoint navigation, detailed mission planning and auto takeoff and landing.
WK-M can be flown in full auto (GPS-Atti) mode from take-off to landing; or in basic Atti mode, while manual mode has non corrective stabilization activated. The system is easy to install with user friendly software allowing on-line firmware and software upgrade.
Vist the DJI WKM Mini Site - CLICK HERE |
Airfrmes Supported: Y6, Quad, X8, Hexa, Octo, Custom
PWM output: 400Hz
Recommended Transmitter: PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels
Power Consumption: MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V)
Operating Temperature: -5°C to +60°C
Dimensions:
Main Controller: 61mm x 39.6mm x 15.8mm
IMU: 40mm x 31mm x 26mm
GPS & Compass: 50mm (diameter) x 9mm
LED Indicator: 25mm x 25mm x 7mm
Total Weight: <= 150g
Built In Functions:
Auto-pilot
Fail-safe
Hover
Gimbal Stabilization
Voltage monitor
Go Home & Auto Landing
|
